Tower
Erection/Maintenance Hoist Model 180-CH-360
<<back
Features
* Meets OSHA
requirements for personnel lifting (rear drum only)
Primary band brake with 3:1 safety factor
Secondary spring applied hydraulic release brake with 3:1 safety
factor
Counter balance valve braking
4:1 safety factor where hoist is anchored to frame
Winch speed preselect @ 200, 100, and 50 fpm
Self-centering controls
Anti Two Block protection
Hour meter
5BC rated fire extinguisher
* Metering control valves
* Caterpillar 3056 DITA 180 HP diesel engine
* Engine preheater
* 100 gallon diesel fuel tank for more than 12 hours of operation
* Hydraulic oil heater for cold weather operation
* Optional 3rd drum
* Optional rear fleeting sheave package
|
Performance
Specifications
For 1 inch wire rope
| |
Low
Speed |
High
Speed |
| |
L.P & L.S. |
L.P & L.S. |
| Bare Drum |
36,600
lbs. @ 100 fpm |
14,128
lbs. @ 200 fpm |
| Average
Drum |
21,960
lbs. @ 167 fpm |
8,477 lbs.
@ 334 fpm |
| Full Drum |
15,686
lbs. @ 233 fpm |
6,055 lbs.
@ 466 fpm |
Approximate
Weights
Without wire
| Double
Drum |
25,000
lbs |
| Triple
Drum |
36,000
lbs |
Storage Capacity
2,590 ft. of 1 inch wire rope
3,551 ft of 7/8 inch wire rope
4,757 ft of 3/4 ince wire rope
Meets or exceeds requirements set forth per OSHA Directive CPL 2-1.29.
|
